Top Navigation
About Us
About IW - Company Profile
Products
IW Product and information Listings
Microwave Cables
Technical Information
Technical Information and Cable Assembly Selector
Contact IW
Contact IW
Custom Connectors
Custom Connectors and Assemblies
Navagation Bottom
IW Logo

Build a Cable
IW Logo
IW Microwave Products
Use the Cable Assembly Configuration Builder below to generate an IW assembly part number. Fill in all appropriate data fields and then click on the "Create the part number" button. Consult the IW CableSelector if you are unsure which IW cable to use in your assembly.
First Connector
Cable & Protection
Type in the Assembly Length
in inches
Second Connector

These connector codes are only available on
the following cables:
1401 & 1403 - K, V, 2
1501 & 1503 - K, S, V, 3, 2
   1601     - B, K, N, O, S, SC, T, 7, 3 
1801 & 1803 - B, N, O, S, T, 7, 3
2301 & 2303 - B, N, O, S, SC, T, 7, 3
2801 & 2803 - N, O, S, SC, T, 7, 3
   4806     - N, S, SC, T

Typical connector configuration availability
Bulkhead Mount;
BMA / BNC / N / OSP /  SC / SMA / SMB / 
SMC / SSMA / TNC / 2.9mm(K)

Obtuse Angle (135 deg.);
SMA

2 Hole Mount;
BMA / OSP

4 Hole Mount;
N /  SMA / TNC

Right Angle;
BMA / BNC / GPO / MCX / N / OSP / SC / 
SMA / SMB / SMC / SMP / SSMA / TNC / 
2.9mm(K) / 7mm

Right Angle w/Wire Holes;
N / SC / SMA / TNC

Extended Right Angle;
SMA

Straight;
BMA / BNC / GPO /  MCX / N / OSP / SC / 
SMA / SMB / SMC / SMP / SSMA / TNC / 
1.85mm(V) / 2.4mm /2.9mm(K) / 3.5mm / 7mm

Straight w/Wire Holes;
N / SC / SMA / TNC

Home - About Us - Products - Technical - Contact - Custom
Build a Cable
- 1401 - 1501 - 1801 - 2301 - 2801 - 4806 - HELP
* NOMEX is a registered trademark od the DuPont Corporation